3 Gauge Fitted Tubesets for 12Ga. Guns (Includes 20ga., 28ga. & .410 Bore)
Ultimate Ultralight Conversion $2,095
Match weight, match balance, straight rifled tubes. Includes long forcing cones, 4 flush screw-in chokes per gauge, red color anodized tubes for top, blue color anodized tubes for bottom.
Ultralight Conversion $,1950
Match weight. Includes 4 flush screw-in chokes per gauge, red color anodized tubes for top, blue color anodized tubes for bottom.
Match Weight Conversion $1,795
Match weight, titanium .410 bore chambers, 4 flush screw-in chokes per gauge, gray anodized.
Trigger Conversion for Inertia Triggers - $150 to $200
Makes your second barrel ready to fire with a minimum amount of recoil, suitable for firing .410 bore shells: required for all inertia triggers.
Beretta DT-10 and DT-11, Browning 725, Ceasar Guerini $200
Most other models $150
Long Forcing Cones - $210
Add $210 in tube set at time of manufacturing (12 gauge must have LFC).
Special Tube Set Colors Available
Add $200 per gauge. Call for color availability.
|
2 Gauge Tubeset for 20ga. Gun (fitted) – Includes 28ga. and .410 bore
Ultralight Conversion - $1,500
28ga., titanium .410 bore chamber, 4 flush screw-in chokes per gauge*, red/blue anodized.
Standard Conversion - $1,400
28ga., titanium .410 bore chamber, 4 flush screw-in chokes per gauge*, anodized.
|
Single Gauge Tubeset (Fitted) - 4 Flush Screw-in Chokes Per Pair |
Tube Size |
Gauge of Gun |
Standard |
Ultralight |
20ga. Tubes |
In 10ga. Gun |
N/A |
$799.00 |
20ga. Tubes |
In 12ga. Gun |
$ 699.00 |
$799.00 |
28ga. Tubes |
In 12ga. Gun |
$ 699.00 |
$799.00 |
28ga. Tubes |
In 16ga. Gun |
$ 699.00 |
$799.00 |
28ga. Tubes* |
In 20ga. Gun |
N/A |
$799.00 |
.410 Bore Tubes |
In 12ga. Gun |
$ 699.00 |
$799.00 |
.410 Bore Tubes |
In 16ga. Gun |
$ 699.00 |
$799.00 |
.410 Bore Tubes |
In 20ga. Gun |
$ 699.00 |
$799.00 |
.410 Bore Tubes |
In 28ga. Gun |
$ 699.00 |
N/A |
Carrier Barrel (Customer Provides Barrel) - $625
The maximum amount of inside barrel material is removed in an effort to make the barrel weigh the same as it did before a sub-gauge tube set is installed. This makes the barrel unable to fire 12ga. Shells.
.410 Chamber Size
All .410 tube set chamber size is 2.5” If you would like to shoot 3” shells please notify your salesperson. Extra $75 charge applies
Companion Tube Sets cannot be installed in the following firearms:
Benelli 828U
Browning 725
Attention Browning 725 owners: please note that due to the lighter recoild and additional weight of the tubes, the factory trigger may not function properly. A modification to the way it operates is required to be able to shoot small gauges. We must have the complete gun to complete this modification. The cost of the service is $200 plus return shipping and insurance.
DT-11, 692, 694
Due to the long tapered bores, these are special order, approximately 4-8 week delivery.
*20 gauge barrels must have a minimum bore diameter of .625” for the 28 gauge tube set to have screw-in chokes. If less than .625” the 28 gauge tube set will have fixed chokes of your choice.
Prices do not reflect return shipping and insurance.